Hi there !
I need set up a CPE aux port to connect to a console port os a PE. I made all the config, but I's not working yet. I thing it's a cable error.
I have already connect a straight and a crossover cable. I saw in a forum that rollover cable would work. What do you think ?
line aux 0
modem InOut
no exec
transport input all
stopbits 1
flowcontrol hardware
router#sh line
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise
Overruns Int
0 CTY - - - - - 0 0 0/0
-
65 AUX 19200/19200 - inout - - - 8 0 2177/0
-
* 66 VTY - - - - - 24 0 0/0
-
67 VTY - - - - - 3 0 0/0
-
68 VTY - - - - - 1 0 0/0
-
69 VTY - - - - - 0 0 0/0
-
70 VTY - - - - - 0 0 0/0
I performed the following:
telnet <loopbak0 ip address> 2065
Received a message open, but no joy.
