The information i would need to confirm, is how many expected days would it take for an engineer to do the activities contained in the Implement guide? and the same for the Administrator Guide?? in a greenfield setup. I am thinking about 10 to 15 business days only for the Implement activities as i can see plenty of features to be considered.
5 business days for a basic Admin configuration and other 5 business days for each case of use required.
Is there any base script that it could be apply in order to get this done in a faster efficient manner?
Some of you may have watched the session at Cisco’s first all-digital Cisco Live and I hope you found it helpful. This is the first in a series of companion blogs that will later cover in more detail the topics discussed in the session today. ...
CCO documentation lists out the ability to do a password recovery for eXR with a ZTP/PXE boot.
One can also perform the operation manually, like a "turboboot" for classic XR in this facinity.
this procedure will wipe out the complete system and install a...
Below is a link to a video showing how to analyze traceroute output in L3VPN and look up CEF forwarding and MPLS/TE/SR/SR-TE forwarding for labels through a domain. Some basic examples of traffic engineering are used but the concepts lend the...
This document summarises various health checks that can be done on a Cisco VIM pod.
Cloud sanity checks the health status of network, storage and various openstack infrastructure components like mariadb, rabbitmq etc....
The following pre-requisites are necessary for the migration from RSP440 to RSP880-LT to be successful.
Make sure that you have console access to the router.
Verify that the system is running a minimum o...