ibgp between CE and PE in IOS XR

[j.restaino]

Hi,

I want to establish a ibgp session between a CE and a PE in a network with MPLS VPN. In IOS found the configuration that i need with the command

internal-vpn-client in http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_bgp/configuration/15-s/irg-l3vpn-ibgp-pe-ce.html#concept_A84A98ACBAE945718530CD9020F8F937

But i could not reply in IOS XR; my PE is a ASR9000 with a IOS XR 4.3.2.1

I will appreciate if somebody could help me with this issue

Regards

[Sandeep Sharma]

Hi,

Here is the required XR  configuration: (in general we have ebgp session between PE-CE)

router bgp 10
 address-family ipv4 unicast
 !
 vrf ACME
  rd 22.22.22.22:47
  bgp router-id 10.0.27.2
  address-family ipv4 unicast
  !
  neighbor 10.0.27.7
   remote-as 47
   address-family ipv4 unicast

For mode details refer the below link:

http://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r4-2/lxvpn/configuration/guide/vc42book/vc42v3.html

Thanks & Regards

Sandeep