Interface Workload

[dfce]

Hallo ,

What can be the Reason, that the Workload or Press on Interface of Core 1 (From MLS 1 Side) in this Network is more, although there is staic Route config with 1 metric to the to core 2 (From MLS ) ,and to the Core 1 the static metric is 5.

also on both MLS the Config is so:

0.0.0.0 0.0.0.0 Core2 

0.0.0.0 0.0.0.0 core1   5

* is i look on mls1 and to, i see that the Output packet to core 2 is more, so it work like the config.

what can be the Reason, that the Interface of core 1 (from MLS1 Side ) has more press in the Monotoring Statics.

*the Config. on Cores are static route to both Mls but without Metric .

[balaji.bandi]

0.0.0.0 0.0.0.0 Core2 
0.0.0.0 0.0.0.0 core1   5

Abive convfig clearly defined which part preferred, so that is expected behaviour, looking at your description and information.

If you looking to Load Balance, use any IGP, so you can load share between MLS and Core.