cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
973
Views
0
Helpful
1
Replies

Nexus snmp interface usage in bps

dax
Level 1
Level 1

HI,

Simple quetion we are trying to pull interface usage in mbps or bps from SNMP to a Nexus 5548p.

We cant seem to use the normal mib we use for this against IOS devices which is 1.3.6.1.4.1.9.2.2.1.1.8  for Out bits sec and 1.3.6.1.4.1.9.2.2.1.1.6 for  in bits sec

We can get IfInOctets/IfOutOctets... but as this is just a increasing counter without alot of work we cannot work out bandwidth usage in Bps or Mbps.

Does anyone know of a MIB we can use against the Nexus to pull back interface usage in bps or mbps?

Regards

Dave

1 Reply 1

Collin Clark
VIP Alumni
VIP Alumni

Have you tried using just the MIB-II instead of the old-cisco-interface?


Sent from Cisco Technical Support Android App

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: