Hi All,
When I issue the command (> p3sm –-show) on the supsciper manager machine I can notice the following line.
Do anybody know what is the meaning of it.
LEG block mode is on: false.
And how to enable (Auto-resync at SCE reconnect)
Sample output:
> p3sm –-show
Subscriber Management Module Information:
=========================================
Persistency in SCE (static): false
Auto-resync at SCE reconnect: false
Save subscriber state on logout: false
Pull mode is on: false
LEG block mode is on: false
Logon logging is on: false
Statistics:
Number of logins: 1872423
Number of logouts: 1824239
Number of auto-logouts: 0
Number of pull requests: 0
LEG-SM link failure:
Clear all subscribers mappings: false
Timeout: 60
Up time: 4 hours 16 minutes 44 seconds
Inactive Subscribers Removal:
Is Enabled: false
Inactivity timeout: 1 hours
Max removal rate: 10 subscribers per second
Task interval: 10 minutes
Last run time: Was never run
Automatic Logout (lease-time support):
Is Enabled: false
Max logout rate: 50 IP addresses per second
Task interval: disabled
Grace period: 10 seconds
Last run time: Was never run
Command terminated successfully
Thanks,
Mohamed
