cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1601
Views
0
Helpful
1
Replies
Highlighted
Beginner

PPPoE + FreeRadius server configuration not working

Hello,

 

I have an ASR1001 that I want to use as PPPoE, I followed a lot of tutorials and howto's but still not working.

 

My actual configuration:

 

----------------------------------------------------------------------------------

version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no platform punt-keepalive disable-kernel-core
!
hostname PPPoE
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable secret 4 -HIDDEN-
enable password -HIDDEN-
!
aaa new-model
!
!
aaa group server radius PPPoE
server 172.17.0.236 auth-port 1812 acct-port 1813
!
aaa authentication ppp PPPoE group PPPoE
aaa authorization network PPPoE group PPPoE
aaa authorization subscriber-service default local
aaa accounting delay-start all
aaa accounting network PPPoE start-stop group PPPoE
!
!
!
!
aaa server radius dynamic-author
client 172.16.0.236 server-key secret123
server-key secret123
auth-type any
!
aaa session-id common
aaa policy interface-config allow-subinterface
!
!
!
no ip domain lookup
ip domain name localdomain
ip name-server 8.8.8.8
ip name-server 8.8.4.4
!
!
!
!
!
multilink bundle-name authenticated
vpdn enable
!
password encryption aes
!
!
!
!
!
!
!
!
redundancy
mode none
!
!
!
ip tftp source-interface GigabitEthernet0
ip ssh time-out 60
ip ssh authentication-retries 4
!
!
!
bba-group pppoe PPPoE
virtual-template 1
sessions per-mac limit 1
sessions auto cleanup
!
!
interface Loopback0
description copy here
ip address 10.20.0.1 255.255.255.255
!
interface GigabitEthernet0/0/0
description to INTERNET
ip address X.X.X.x 255.255.255.0
negotiation auto
!
interface GigabitEthernet0/0/1
description to PPPoE Customers
no ip address
negotiation auto
pppoe enable group PPPoE
!
interface GigabitEthernet0/1/4
description to RADIUS
ip address 172.16.0.252 255.255.255.0
negotiation auto
!
interface GigabitEthernet0
vrf forwarding Mgmt-intf
ip address 10.69.69.1 255.255.255.0
negotiation auto
!
interface Virtual-Template1
mtu 1492
no ip address
peer default ip address pool Publico
ppp authentication chap PPPoE
ppp authorization PPPoE
ppp accounting PPPoE
ppp ipcp dns 8.8.8.8 8.8.4.4
!
ip local pool Publico 10.10.10.100 10.10.10.200
ip forward-protocol nd
!
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 5.1.32.1
!
access-list 20 permit X.X.X.x
!
snmp-server community public RO
!
!
radius server RadiusServer
address ipv4 172.16.0.236 auth-port 1812 acct-port 1813
key secret123
!
!
control-plane
!
!
line con 0
stopbits 1
line aux 0
stopbits 1
line vty 0 4
access-class 20 in
transport input ssh
line vty 5 15
access-class 20 in
!
!
end

-------------------------------------------------------------------

 

My "customer" is a Mikrotik router with username and password I have in radius table but if I scan for pppoe servers nothing is listed.

 

Anyone know if i need to change something or what?

 

Thanks

Everyone's tags (4)
1 REPLY 1
Beginner

Re: PPPoE + FreeRadius server configuration not working

Hi, share the contiguration in the table radgroupreply and logging of ASR.
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards