i am searching for IOS XR qos document that explains each command like " police" with all its parameters + HW impact and capabilities
also WRED \ SHAPE \ bandwidth etc .... i search for 2 days and found all what cisco has to offer .... and it is not much cus the explanation about this
commands are not detailed and poorly explained ....
if u got some good source of info about this it will be appreciated !
You can refer to the below support community document by Alex:
Also you can refer to the configuration guide (i am sure you might have already searched for that). But the above document has more clarification of QoS and how it works on platform.
Hope this helps.
@Vinit Jain - i would like to thank u for ur replay ,but
this document is very nice but nothing more ....
is there some thing else ?
i am specifically searching for the police and shape command !!!
Below CCO document will have most of the information on policing and shaping on XR platforms.
Please note that there wont be any impact with these commands when configured properly. Also the behavior should be as documented in this link unless there is a software defect being hit.
There are some good Cisco Live sessions on this topic:
Hope this helps.
Thank u for ur response , but still this stuff is not satisfying ....
cus after i read it , i still can not say that i truly understand ....
but i found some good files on the topic ...
still not 100% greate but best so far .... =)
i would like to ask some more spesific questions :
1.bandwidth remain percent X - what does this command do execly ?
2.there are 2 type of police
1.single bucket , single token
police <CIR><unit> burst <BC> <unit> || percent <1-100>
2.dual bucket , dual toke
police <CIR><unit> || percent <1-100> burst <BC> <unit>... peak-rate <PIR> peak-burst<unit>
first of all i do not understand those 3 parameters
remain percent X,percent <1-100>, and also i will appriciate the differance between
shape avarage and peak .... =)