cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
622
Views
0
Helpful
1
Replies

QoS per VLAs

dear all, 

I have cisco 3850, and I'm trying to enable QoS per VLAN, my configurations as below, I have port as a trunk port, when applying the service police it take it, but when I do sh run int I didn't see any service police .. any advice plz 

 

class-map match-any VLAN77
match VLAN 77

 

class-map match-any B
match dscp af23

 

policy-map B
class B
priority percent 60

 

policy-map BB
class VLAN77
shape average 6400000000
service-policy B
class VLAN593
shape average 6400000000
service-policy B
class class-default

 

SW (config)# interface TenGigabitEthernet1/0/1
SW (config-if)# service-policy output BB
end

 

SW # sh run interface TenGigabitEthernet1/0/1
switch port trunk allowed vlan 5,77,203,593,2008
switchport mode trunk

 

1 Reply 1

Kindly, Any update..

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: