Is it possible to access the DNCS GUI remotely over a VPN by using a X Server on a Windows machine? It is my understanding that Cisco does not allow our DNCS network to be connected to the internet in any way even to allow remote access. We currently drive in on the weekend and after hours to make changes in the DNCS. Does anyone else access the DNCS GUI remotely? We could save alot of drive time if we could us it over a VPN. Thanks.
I am not sure if you found your solution yet but here is what worked for me. Using putty version 6.0 in conjuntion with exceed and our SSL VPN I am able to connect remotly with the DNCS GUI. The information can be found on the Cisco site document # 4034689 REV A, Title DNCS System Release 5.0 Security ConfigurationGuide. I hope this helps.
Hi Everyone, Would like to extend my thanks in advance for anyone offering assistance. As the subject hints, anyone here know of a way to convert IOS configs to XR config? I seen and heard about SOX tool but i am unable to find it. I also tried ...
When I run the command 'sh controllers fabric fia q-depth location 0/0/CPU0' or any 0/X/CPU0 and see the following, what exactly does it mean? RP/0/RSP0/CPU0:Router#sh controllers fabric fia q-depth location 0/0/CPU0********** FIA-0 **********Categor...
Symptoms: the root password can't log in by GUI Solution:1) login CLI as admin2) write command "ncs webroot enable" without qutations3) we can check the status by "ncs webroot status" hope this will help someonethanks
ISO images are as close as we can get to the old school classic IOS images from back in they day.
Doing upgrades by putting a new image on the flash, changing the boot pointer and reload was and is still the walhalla of Cisco based devices.