We have a Cisco 7609 router. We are wanting to purchase a SAMI board
(Service and Application Module for IP - WS-SVC-SAMI-BB-K9 ). With reference to the requirements:
• All Cisco 7600 Series Chassis and 7600 S-Chassis are supported.
• Cisco Service and Application Module for IP is supported in Cisco IOS® Software Release 12.2(33)SRB1 (native) for the Cisco 7600 Series.
• Supported supervisor engines are:
– Supervisor Minimum IOS Software release
– WS-SUP720 12.2(33)SRB
– WS-SUP720-3B 12.2(33)SRB
– WS-SUP720-3BXL 12.2(33)SRB
– WS-SUP32-GE-3B 12.2(33)SRC
– WS-SUP32-10GE-3B 12.2(33)SRC
– WS-RSP720-3C-GE 12.2(33)SRC
– WS-RSP720-3CXL-GE 12.2(33)SRC
– WS-RSP720-3CXL-10GE 12.2SRE
• Single or redundant supervisor engine configurations are supported.
• There is no restriction on other cards (such as service and network modules) on the chassis.
I noticed that it only mentions a “Supervisor Engine”. The thing is our Cisco 7609 uses Switch Processors and NOT Supervisor Engines. I know they are similar, so will the SAMI board work with “Switch Processors”?
I have never customer using RSP with SAMI, In what enviorment you would be using this 7609 and SAMI .
Like we do use for CORE SS7 traffic sms,gtt and many other things.
Below is the one which i can see
The RSP720 provides several new features and enhancements, which are summarized here. For details, see the Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SR.
•720 gigabits per second (Gbps) bandwidth (320 Gbps ingress and 320 Gbps egress)
•A faster CPU and additional memory to support larger configurations and more subscribers
•Performance and scalability improvements
•Quality of service (QoS) enhancements
•The RSP720-GE ships on the route processor (RP) with default 2-GB memory for the 3CXL version and 1-GB for the 3C version. The switch processor (SP) ships with a default 1-GB memory. Memory options are available to upgrade to 4-GB memory on the RP. From Cisco IOS Release 12.2(33)SRD1 onwards, a 2-GB memory upgrade option is supported on the SP.
Supported Chassis, Line Cards, and Modules
The RSP720 supports the following Cisco 7600 chassis, line cards and modules:
•Supported on all Cisco 7600 routers (including enhanced chassis) except the Cisco 7603 and the Cisco OSR-7609
•SPA interface processors (SIPs) and their shared port adapters (SPAs): 7600-SIP-600, 7600-SIP-400, and 7600-SIP-200
•Enhanced FlexWAN module (WS-X6582-2PA)
•Ethernet services modules: 2-port 10 GE line card (7600-ESM-2X10GE) and 20-port 1 GE line card (7600-ESM-20X1GE)
This document summarises various health checks that can be done on a Cisco VIM pod.
Cloud sanity checks the health status of network, storage and various openstack infrastructure components like mariadb, rabbitmq etc....
The following pre-requisites are necessary for the migration from RSP440 to RSP880-LT to be successful.
Make sure that you have console access to the router.
Verify that the system is running a minimum o...
BGP flowspec in a nutshell is a feature that will allow you to receive IPv4/IPv6 traffic flow specification (source X, destination Y, protocol UDP, source port A .. etc) and actions that need to be taken on that traffic (...
While gNMI is fairly new, it's becoming more and more powerful. Its abilities to simplify network management by the use of protocol buffer files and standard definitions are enabling our customers to integrate a lot ...
Today we are releasing to the public a tool to help find differences in command outputs in two points in time (IE pre and post MW).
The issues we are addressing is what commands to gather and how to successfully parse the data when timestamps, upti...