cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1417
Views
0
Helpful
5
Replies
ctioko
Beginner

SCE Bootup Problem

Hi Guys I have an SCE 2000 which failed after installation. the problem is i cant get access through the console, it does not respond. when i get access through the AUX port, the first prompt is [VxWorks Boot] if i try to reboot it gives the error cant load bootfile.

kindly assist

5 REPLIES 5
Gustavo Paiva
Beginner

Hi everybody,

This is an old post, but I have the same problem... somebody knows how to boot the SCE from the VxWorks console?

Regards,

Gustavo.

Hi Gustavo,

Did you get an answer to this problem?

I have the same problem !!!

Hi,

First you need is a file named "SEos"... I looked for this file in the download area of Cisco could not find it.

Then the procedure is very similar to others using VxWorks...


Regards,

Gustavo.

miroslav.slavkov
Beginner

If you have a running box, you can extract the OS file and boot it with TFTP.

The file name is 'seos'.

Hi, I have the same issue, but the network card doesnt boot, how can I get the management Ethernet interface to come up in the VX works boot mode so I can copy the seos file from another working device?

Content for Community-Ad