I see that your list includes Cisco Insight Reporter and Cisco Service Control Subscriber Manager. Those are SW pieces which will require some servers to run them. You can review the following documents to have an idea of the SW and HW requirements for the servers required to run those components:
If you have any doubt, I would strongly suggest you to reach out to your local Cisco Acount Team for these type of questions. They will be able to provide you proper support and guidance for these type of inquires.
IntroductionFeature EnablementMirroring explainedConfiguration & VerificationLimitations
Prior to Cisco IOS XR Software Release 7.1.2, XR dual RP devices did not support file mirroring from active RP to standby RP. Administrators ...
Hi Everyone, Would like to extend my thanks in advance for anyone offering assistance. As the subject hints, anyone here know of a way to convert IOS configs to XR config? I seen and heard about SOX tool but i am unable to find it. I also tried ...
When I run the command 'sh controllers fabric fia q-depth location 0/0/CPU0' or any 0/X/CPU0 and see the following, what exactly does it mean? RP/0/RSP0/CPU0:Router#sh controllers fabric fia q-depth location 0/0/CPU0********** FIA-0 **********Categor...
Symptoms: the root password can't log in by GUI Solution:1) login CLI as admin2) write command "ncs webroot enable" without qutations3) we can check the status by "ncs webroot status" hope this will help someonethanks
ISO images are as close as we can get to the old school classic IOS images from back in they day.
Doing upgrades by putting a new image on the flash, changing the boot pointer and reload was and is still the walhalla of Cisco based devices.