[SCE 8000]
System version: Version 3.6.5 Build 489).
[SM]
./p3sm --version
3.6.5 Build 300
[Problem desc]
I have 2 SCEs, not in cascade mode.
SCE S132SCE8000T2 gone to quarantine mood and can't auto-recover.
./p3log -> log.txt says (attached):
2011-06-01 13:24:00 | ERROR | SM | SCE S132SCE8000T2 has been put in quarantine for the next 7680 seconds - Failed to perform logon operation
I moved SCE back to normal operation using ./p3net --connect --ne-name=S132SCE8000T2 and quarantine reset.
Now situation as follows:
Synchronization Status: Not-done(100% failures) for S132SCE8000T2.
I try to use ./p3subs --resync --ne-name with no effect:
>./p3sm --resync --ne-name=S132SCE8000T2
Error - Failed to synchronize S132SCE8000T2
S132SCE8000T2 is not active
How can I resolve the problem and why the failure occured?
>
>
>./p3net --show-all --detail
==============================================================================
| Name | Host | Conn- | Sync- | Domain |
| | | Status | Status | |
===============================================================================
| S132SCE8000T1 | 172.24.7.17 | up | done | subscribers |
| S132SCE8000T2 | 172.24.7.20 | up | not-done | subscribers |
Command terminated successfully
>./p3net --show --ne-name=S132SCE8000T2
Network Element Information:
============================
Name: S132SCE8000T2
Host: 172.24.7.20
Ip: 172.24.7.20
Port: 14374
Status: Connection ready
Type: SCE8000
Domain: subscribers
Synchronization Status: Not-done(100% failures)
Redundancy Status: Standalone
Quarantine Status: ok
Command terminated successfully
>./p3net --show --ne-name=S132SCE8000T1
Network Element Information:
============================
Name: S132SCE8000T1
Host: 172.24.7.17
Ip: 172.24.7.17
Port: 14374
Status: Connection ready
Type: SCE8000
Domain: subscribers
Synchronization Status: done
Redundancy Status: Standalone
Quarantine Status: ok
Command terminated successfully
