03-08-2019 09:01 AM - edited 03-10-2019 11:36 AM
Hi,
existing Cisco ASR1001-HX has hardware issue and cisco agree to replace with the new one.
This is my first time to replace for whole router.
May i know is there any procedure for install IOS and activate the license ?
Apart of the copy of current configuration is there any files do i need to back up and restore in new device.
really appreciate for the help.
Regards
Alvin
03-08-2019 09:10 AM - edited 03-08-2019 09:12 AM
Get the new Kit and Power on do the basic configuration as mentioned below document :
Apply the License as mentioned above same document.
If the New Device shipped with Old Os upgrade to latest as required in the environment.
Take Old Kit backup configuration and copy in to new kit, restart the kit and compare all config as expected on both the devices.
Write the configure.
in the Maintenance window. remove old kit cables and connect to new Kit(any switches it connected, clear the ARP entry, since new device have new MAC Address)
Good luck.
03-08-2019 03:20 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide