Ubr 10k - CM Black List

[aschonfeld]

Hi Guys,

I need to know how to can I configure a black list of Cable Modems and apply them into a specific cable interface to prevent that one (or more) specific Cable moedm can`t send paquets to the network.

Thanks.

Alejandro

[akhurshi]

Hi,

I am not sure if I completely understand your intentions here but if you are trying to block access to the network for a set of cm's then you can just use a cm file such as disable.cm to restrict access to these modems.

Following is the documentation 
on how to assign disable.cm file to individual cable modems

http://cisco.com/en/US/partner/tech/tk86/tk804/technologies_configuration_example09186a008
0134b34.shtml#advanced-config

Hth,

[aschonfeld]

thanks for your answer, but this is not my intention. I want to block one or more MACs... but We found that is feature is reached using the "cable privacy hotlist cm" and it works ok!.

Thanks again.

Alejandro

[akhurshi]

Yup that will work too.

Cheers,

[Mark Pace Balzan]

Hi,

can you tell me if this work on the ubr10k via CLI ?

from the release note, it seems to be only available via snmpset for the ubr10k

was it include via CLI in the more recent IOS for 10k ?

thanks

Mark