Please tell me the outdoor accesspoint which covers upto 9km in each direction. Actually laptop and home users which have to connect to Head Office. How it is possible using wi-fi. Please tell me any solution.
I am not aware of any WiFi solution that will work over a 9km range. There are some alternatives, however:
If you gave access to licensed WIMAX spectrum (2.3 GHz, 2.5 GHz or 3.5 GHz), an outdoor link can work over those ranges. Alternatively, if unlicensed is the only solution you have, you could use a point to multipoint solution such as a Mesh system.
Thanks for your reply. Please tell me that if I use Canopy, will it work with indoor CPE. And if I use Cisco WiMax, will how much hieght of tower is required for 9km distance with indoor CPE from all directions.
If you want to use an indoor modem, the maximum distance for WIMAX is typically in the 2 - 3 km range depending on wall thickness and frequency. You can use outdoor (rooftop) antennas over ranges up to about 15 - 18 km, where the limit is actually the speed of light and processing time. We need either faster processors, or a non-Einsteinan universe
The Canopy system uses all outdoor antennas, and can acheive ranges in the 20 to 50 km area depending on terrain, using unlicensed spectrum and directional antennas. Unlike WiMAX or WiFi which both use OFDMA, it uses FM with long frame sizes, so it can work over the longer distances.
loadbalancing is one of the more complex items in hardware forwarding. of course we have talked about it many years on cisco live (id 2904) with ever incrementing more detail. and there is the support forum article on loadbalancing.
IntroductionArchitecture Building BlocksIOS-XR RoutersConfigurationPerformance VerificationOptimizationStrict timerSome more verificationThe CollectorInfluxDBDatabase statistics and HealthClosing comments
This document was written in collaboration with:
IOS-XR MPLS TE Auto Tunnel Backup Bandwidth Protection Current Implementation of MPLS TE Auto Tunnel BackupPotential issue with current implementation of MPLS TE auto tunnel backupEnhancement to MPLS TE auto backup in IOS XR 7.5.1Supported HardwareConfig ...
we are trying to monitor the Cisco 9148s SFP status, and have get the Sensor's dBm value from the CISCO-ENTITY-SENSOR-MIB table, meanwile , it has an Index value like "30000xxxx",such as "30001773", entsensorValueTable but we can't sure how to l...
Check out our latest release on Cisco Routed Optical Networking solution. Listen: https://smarturl.it/CCRS8E24Follow us: https://twitter.com/ciscochampion Disruptive network transformation may only happen once a decade. First movers c...