cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
640
Views
1
Helpful
4
Replies

Cisco ATA 122 Issue: Unauthorized Traffic?

Antonio-S
Level 1
Level 1

Unfortunately, for a few days my Cisco ATA-122 seems to have some problems. In the face of no VoIP phone call, it receives and transmits traffic from/true internet as if it were on a phone call. Unfortunately, no conversation is taking place. On my firewall I have opened the ports essential for VoIP communication in port range forwarding. Initially UDP+TCP then only UDP, but nothing has changed. How can I get rid of this problem? Is the release of a new firmware planned for security reasons? Thank you.

2 Accepted Solutions

Accepted Solutions


@Antonio-S wrote:
I updated the firmware.

The ATA should stop talking SIP and HTTP/HTTPS traffic should stop, as per the Field Notice.

View solution in original post

Thank you. I isolated it properly, by router firewall, and now it doesn't seem to give any more problems. I have left open only the necessary ports and I accept traffic from the VoIP server only.

View solution in original post

4 Replies 4

Leo Laohoo
Hall of Fame
Hall of Fame

Do not upgrade the firmware of the ATA121/122.  

The firmwares for the ATA121/122 contains an expired QuoVadis certificated.  Even though it is an easy enough fix, Cisco is unwilling to fix it so people will upgrade to a "newer" model.

Thanks for the reply. I updated the firmware. Until which version does the problem not arise?


@Antonio-S wrote:
I updated the firmware.

The ATA should stop talking SIP and HTTP/HTTPS traffic should stop, as per the Field Notice.

Thank you. I isolated it properly, by router firewall, and now it doesn't seem to give any more problems. I have left open only the necessary ports and I accept traffic from the VoIP server only.