cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
350
Views
0
Helpful
7
Replies
Highlighted
Cisco Employee

1142 question

Using an 1142 in a stand a lone environment, (I changed the default firmware to the stand alone) - how do I also set up security to support a MAC address along with WPA2 Personal?

Thanks

7 REPLIES 7
Highlighted
Cisco Employee

Hi,

here is the link to configure WPA2 on the AP..

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml#pers

Lemme know if this answered ur question!!

Regards

Surendra

Regards
Surendra BG
Highlighted

Actually I see WPA, but I don’t see where to enable MAC level security.

Michael

Highlighted

Highlighted

What I am trying to do is to set up security on my home 1142. I currently have a Linksys router (AP) using WPA2 (pre-shared key) and also MAC filtering. I am trying to do the same with the 1142.

If I can do RADIUS, etc, then that is cool also, just looking for a secure AP. NOTE: I would need to leverage the APs RADIUS server, if it has one, etc.

Thanks

Highlighted

Highlighted

MAC filiter is pretty easy to break by spoofing it, just an FYI.

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________
Highlighted

Thanks for the details guys.

As a note, to spoof the MAC, dont you need to know what to spoof though? So with MAC filtering and WPA2 Personal, I woudl think this is pretty secure.

Michael

Content for Community-Ad