Hi can anybody help me .
we have few sites with old 1232 ag AUTONOMOUS existing AP's , They are connected through 1 mbps link to main office .
Now we are planing to upgrade with WLC 5508 and few 1140 ap . but we want to use these same 1232ag ap on some sites.
So we need to upgrade it to LWAP .
1>Is it possible to upgrade this model of AP
2>Which is the ios i should download , is it avaliable in cisco site (as this ap is end of sale now )
3>can any body help me how the step to upgrade this autonomous ap
Yes you can upgrade 1230 APs.
You need to download whatever IOS image from cisco site. download the "IOS Software" image and not the "lightweight" image.
Just to add, the 1230's are not supported on the 7.2.x wlc code. You can however run the 7.0.x on the 5508 to support the 1230's. Also make sure you look at this link, because you might have to add the hash value to the wlc in order for them to join. It depends when the APs were manufactured.
Sent from Cisco Technical Support iPhone App
Also, the 1232 will not support hreap mode. I can not tell from the original post if you are trying to install local or hreap. Just fyi.