1262 Lwap AP unable to join 5508 Wireless controller

[nikhil.kaushik]

output are here

*Mar  1 01:28:21.018: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY

*Mar  1 01:28:21.022: %LWAPP-3-CLIENTERRORLOG: bsnSetCurrentBHRate : fail to set

radio control and data rate

*Mar  1 01:28:21.179: %CDP_PD-2-POWER_LOW: All radios disabled - AC_ADAPTOR  (00

00.0000.0000)

*Mar  1 01:28:21.984: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth

ernet0, changed state to up

*Mar  1 01:28:34.341: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigne

d DHCP address 192.168.10.244, mask 255.255.255.0, hostname AP2c54.2d0d.c3c4

[George Stefanick]

Is this your first 1262 ap ? How is your WLAN co figured to allow your aps to find your controller!? Are you doing option 43, DNS, what ?

Sent from Cisco Technical Support iPhone App