I need some advice configuring a root 1552e (yes the new one) to connect to one lw1522i and three autonomous1310G bridges.
Reading the Cisco Mesh Access Points Deployment guide the WLC (v 7.3) configuration for the 1552s seems pretty straight forward.
My question is how to configure the 1310s.
Here is what I am trying to do:
The 1552e root is the root on the main building. The 1552i on the shop will be a bridge and trunk five vlans (100-104). The three 1310s on smaller buildings will also be bridges off the root1552e and will trunk 2 vlans (100-101).
I would like to have the 1310's BVI1 interface to be on a vlan 100 address.
We are using a Microsoft Radius server for authentication.
