1572i Outdoor Access Point installation confusion

[kirankumarhm]

Hi,

I would like to know does 1572i has PoE option or not ?

does it MUST require external power source or is it supported with UPoE switch ?

I read 1570 Series Outdoor Access Point Hardware Installation Guide where in it says 1572i is UPoE supported in Powering options section.

but deployment guide says 1572i powered either by DC or Power over cable.

can anyone who has already installed please suggest.

Thanks in advance.

[Leo Laohoo]

uPoE is supported.

[kirankumarhm]

Thanks for the response.

so Just wanted to be clear we don't need PoC connection to power up if we have uPoE switch correct ?

and also on the ordering page it shows to select cable modem software even if we don't use cable modem is it something MUST to select and opt for ? if yes what is the default to be select for US region.

[Leo Laohoo]

Ok, I've made a mistake.  My apologies. 

For a 1572I, it's either DC or Power over Cable.  

Table 10.     Powering Options for the Cisco Aironet 1570 Series

Powering Option	AP1572EAC	AP1572IC	AP1572EC
AC    (Alternating Current)	√
PoC  (power over cable)		√	√
PoE   (power over Ethernet)	√
DC    (Direct Current)	√	√	√

[kirankumarhm]

Thanks for sharing the info.

I read this document but another document shows below. 

can you please share physical installed and other experience.