1602E Dot11Radio interfaces Admin down

[Kenny McLean]

Hi,

I have a cisco 1602E connected to my 3850 WLC.  The 1602E LWAP has joined the WLC and i can control the LWAP via the 3850 wireless gui.

However, I cannot see the SSID being transmitted - all settings to transmit the SSID are good.

The issue lies (I think) with the Dot11Radio interfaces (0 &1) being Admin down, but i cannot bring them up either via the CLI on the 1602E or via the wireless GUI.  Can someone please tell me where I should be looking?

Cheers

[Kenny McLean]

So i was told that i was able to do the usual interface config from a remote ssh/telnet session to the WAP which worked. 

Still confused though as to why the usual

#conf t

(config)#int Dot11Radiox

(config)#no shut

wouldn't work from the console connection.

[mohanak]

Refer the link : http://www.cisco.com/c/en/us/td/docs/ios/12_4t/wlan/configuration/guide/wlcgbsc.html