cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

273
Views
0
Helpful
6
Replies
Highlighted
Beginner

1815i multiple SSID mapping to VLANs

I have 1815i access point, OS 8.5.140, I want to create 4 SSID mapped to different VLANs

- when access point boots, it gets to "(Cisco Controller)>" prompt, not ap# prompt

- attached files shows booting output, and GUI, they are not as described in config guides. so I can't follow the steps. 

6 REPLIES 6
Rising star

Re: 1815i multiple SSID mapping to VLANs

The 1815 can use Mobility express.

you need to configure it via the mobility express controller

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-3/b_Cisco_Mobility_Express_Deployment_Guide/b_Cisco_Mobility_Express_Deployment_Guide_chapter_010.html

 

 

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***
Beginner

Re: 1815i multiple SSID mapping to VLANs

it's the only access point I have right now. can it be configured with SSID's mapped to different VLAN's. 

Rising star

Re: 1815i multiple SSID mapping to VLANs

yes you map the WLANs to different VLANs and need port connecting to AP to be a trunk port allowing the VLANs

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***
Beginner

Re: 1815i multiple SSID mapping to VLANs

the access point boots with "(cisco controller)>" prompt, not ap#, also GUI is different that what is described in guides. 

 

how can I configure it

VIP Mentor

Re: 1815i multiple SSID mapping to VLANs

Configure AP as master AP, it will act as WLC as well.

 

see the example here:

https://www.lookingpoint.com/blog/mobility-express

https://keepcalmandping.online/2019/03/18/cisco-mobility-express-experience/

 

After Setup, configure the port on switch side as: The following is a sample switch port configuration.
Interface GigabitEthernet1/0/37
description » Connected to Master AP «
switchport trunk native vlan 122
switchport trunk allowed vlan 10,20,122,123,124
switchport mode trunk

 

Regards

Dontf orget to rate helpful posts

Beginner

Re: 1815i multiple SSID mapping to VLANs

I will try resetting the AP, and follow the advised tutorials, and post the updates. 

 

thanks,

CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards