07-10-2015 02:18 AM - edited 07-05-2021 03:33 AM
Hi,
We are not able to join AP 3702e to WLC ver 7.6.130. Software version and console output is an attached file.
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco AIR-CAP3702E-D-K9 (PowerPC) processor (revision A0) with 376810K/134656K bytes of memory.
Processor board ID FGL1909X179
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 8.0.110.0
1 Gigabit Ethernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: A8:9D:21:DF:F1:98
Part Number : 73-15397-01
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : FOC19050J4U
--More--
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.25Top Assembly Part Number : 068-05055-04
Top Assembly Serial Number : FGL1909X179
Top Revision Number : A0
Product/Model Number : AIR-CAP3702E-D-K9
Configuration register is 0xF
7.6.130 wlc
Thanks
Kamlesh
07-10-2015 02:31 AM
07-10-2015 03:22 AM
The OS you list is compatible with this AP model, however it appears to be a country code mismatch between the AP and wireless controller settings. The specific AP hardware sku you listed is 'D' which is manufactured for regulatory compliance in countries such as India. This AP model will not associate to the wireless controller without a matching country code. Disable the SSIDs on the controller, go to Wireless tab and down to Country and select IN or another supported country code for this model of AP, reenable the SSIDs and the AP will be able to be staged. Regards
http://www.cisco.com/c/en/us/products/collateral/wireless/access-points/product_data_sheet0900aecd80537b6a.html
07-10-2015 03:58 AM
Hi Adams,
Country code is already IN and more then 250 APs already registered and working in Flexconnect mode.
Kamlesh
07-10-2015 04:58 AM
Hi,
TAC advise us to upgrade AP software version from 15.3(3)JA1 to 15.3(3)JA4.
Kamlesh
07-10-2015 05:30 AM
Hi,
After upgrading IOS, it is still not registering, same problem.
Kamlesh
07-11-2015 01:27 AM
You are hiding some important information.
Reboot the AP and post the COMPLETE output. I want to see what the AP is doing.
Post the COMPLETE output to the WLC command of "sh sysinfo".
07-19-2015 09:43 AM
Hi Leo,
It has been resolved, actually there is encryption enabled in WAN link which was not enabled at WLC side, after enabling encryption, all APs register without upgrade.
Thanks,
Kamlesh
10-02-2015 01:58 PM
Hi Kamlenegi,
I have same problem with my WLC and AP. How did you fix the problem?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide