09-12-2008 05:33 AM - edited 07-03-2021 04:28 PM
Hi,
I have a metwork with 35 AP 1242 (only 2.4ghz band) and 30 7921g.
I'm using a WLC 4404 version 4.2.61 7921G version 1.1.1, CCME version 4.1, AP IOS 123-7JX.
The coverage seems to be good and also the overlap.
The problem is: some times casually and also not walking we lost voice (one way o both way) for 10 or more seconds the call is still active. I tried to improve roaming, I have enable WMM support, DTCP and all the features racomanded on the wlc docs. I have analised RF interfernce with wy-spy and not seems to be relevant interference. The AP profiles are all in pass (if you check on the WLC) I can ping the CCME with a PC on the WiFi VoiceVLAN.
It very stange and a can't find a solution because the problem is not localised in an area. It is more evident when we have a conversation between 2 wifi phones.
I can't find a way to solve the problem.
Thanks
11-24-2008 09:24 PM
There was no bug for this issue. Which issue are you referring to?
11-27-2008 02:16 PM
Hi all,
I see that my post is very intersting.
In the last days I closed the TAC with the solution: do not use dinamicWEP+LEAP on the WLC.
I changed the auth type in WPA+CCKM and the situation is chenged radically!
No the voice quality is very good an no probles.
If you whant I can post the mail of the TAC.
BYE
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: