I am trying to select WPA/WPA2 as the security mode for the 8821 WLan settings. However, when I go to the phone the choices I get are only WEP, PSK, EAP-FAST, EAP-TLS, PEAP-GTC, and PEAP-MSCHAPv2. I updated to the latest firmware and I also looked through the settings on Call Manager and did not see any options for adding WLAN security modes.
Is there some sort of configuration that is missing on the WLAN controller?
Thank you for your response. I dont have much experience with these wireless phones so when you mean key management style..is that a setting on the phone you are referring to? Currently I do not get WPA and WPA2 as a choice on the phone for security mode.
Hi, My customer wants to Download a report of users with MAC addresses who logged in June 2020. He is using PRTG but that Server is not connected with WLC. What we need to do to achieve this goal? Thanks in advance. Regards,Waqas
[ The link to the discussion will be published on November 10th ]
This event is an opportunity to discuss the LTE market trends from a consumer perspective, highlighting the 4G LTE service from Cisco Enterprise BU. Furthermore, we will discuss the strateg...
Hi All,We have 9100 AP trying to join on 9800 WLC. When AP try to join controller it gives below error Sending Join request to 172.16.31.66 through port 5254Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Join(5)Discarding msg CAPWAP...
Hello, I hope somebody has a solution for the issue I am facing. I have 2 WAP150's, both with firmware 184.108.40.206, and I am not able to save a specific change. Under Wireless > Radio > Advanced Settings > Legacy Rate Sets I can unselect ra...