cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
285
Views
4
Helpful
2
Replies

Access points switchover from faulty WLC

Shivu b
Level 1
Level 1

Hi All,

I have 4 Light weight access points and they are associating with WLC at XYZ site but associated WLC found hardware faulty.

I want to joins these AP's  to nearest site WLC for temporary in order to minimize the impact of users..

Could you please guide me how can I perform.

Thanks in advance.

2 Replies 2

You can configure DHCP option 43 on the AP management subnet DHCP scope to specify the new controller IP address

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/97066-dhcp-option-43-00.html

Else you can use broadcast forwarding method explain in the below post

https://mrncciew.com/2013/05/04/wlc-discovery-via-broadcast/

HTH

Rasika

*** Pls rate all useful responses ***

Hi Rasika,

Thanks for your reply.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: