cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

86
Views
4
Helpful
2
Replies
Beginner

Access points switchover from faulty WLC

Hi All,

I have 4 Light weight access points and they are associating with WLC at XYZ site but associated WLC found hardware faulty.

I want to joins these AP's  to nearest site WLC for temporary in order to minimize the impact of users..

Could you please guide me how can I perform.

Thanks in advance.

2 REPLIES 2
Highlighted
VIP Mentor

You can configure DHCP option

You can configure DHCP option 43 on the AP management subnet DHCP scope to specify the new controller IP address

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/97066-dhcp-option-43-00.html

Else you can use broadcast forwarding method explain in the below post

https://mrncciew.com/2013/05/04/wlc-discovery-via-broadcast/

HTH

Rasika

*** Pls rate all useful responses ***

Beginner

Hi Rasika,

Hi Rasika,

Thanks for your reply.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards