Wi-Fi are meant to coexist but there will be no roaming between then. If you are using the same SSID and the same PSK, there will be fast disconnection and reconnection among Access Points but this is not actually roaming.
Roaming is a complicate process that requires a pre-authentication and key cache and sharing which will be available with WLC and/or WDS.
The best option is install a small WLC or use ME among all APs.
WLAN Poller provides functionality to:
Bulk data/debug collection from Controllers and APs. Execute the commands on regular intervals.
DFS statistics and debug collection
IOS AP Flash health check and memory
AP cert check with generating reports
My report tells you a simple viewpoint to understand the evolution of the wireless LAN from 1997 to the 2020s. You can also get basic knowledge on an uplink of Wi-Fi6, the latest IEEE 802.11ax standard. Data analysis results based on our experimental s...
WLAN controller newb here. A power outage took out my home network but upon return my two SSIDs came back and my three APs went blue... everything WiFi related was working as expected. Sometime later I logged into the WLAN Controller web-page to see I hav...
Will an AP join the desired Flexconnect group by default in an HA N+1 redundancy as it does in HA-SSO as a cloud entry ? Does it join the same Flexconnect group of which it was a member of prior to switchover or do I need to add it into the desired Flexco...