As documented, we have to search between all joined APs in Prime and then choose one by one and drag it to the correct location in the map. If there are hundreds of maps and thousands of APs, this will take months of configuration.
That´s one thing Cisco should improve on Prime urgently. But, for now is the only way. You can see for yourself that when on the you can´t choose any other option but AP only.
It is not necessary pick up one by one, you can select a series of AP on the page, drag to the Map and arrange it later. But, still, it is too demanding.
One promise option is the integration of Prime with Google Earth, which could give you the ability to use coordinates, but, this is useful for larger areas. Indoor environment I am afraid that could not be useful.
-If I helped you somehow, please, rate it as useful.-
Hi, My customer wants to Download a report of users with MAC addresses who logged in June 2020. He is using PRTG but that Server is not connected with WLC. What we need to do to achieve this goal? Thanks in advance. Regards,Waqas
[ The link to the discussion will be published on November 10th ]
This event is an opportunity to discuss the LTE market trends from a consumer perspective, highlighting the 4G LTE service from Cisco Enterprise BU. Furthermore, we will discuss the strateg...
Hi All,We have 9100 AP trying to join on 9800 WLC. When AP try to join controller it gives below error Sending Join request to 172.16.31.66 through port 5254Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Join(5)Discarding msg CAPWAP...
Hello, I hope somebody has a solution for the issue I am facing. I have 2 WAP150's, both with firmware 188.8.131.52, and I am not able to save a specific change. Under Wireless > Radio > Advanced Settings > Legacy Rate Sets I can unselect ra...