adding WCS server in ACS for AAA

[hassan_si]

Hi,

I tried to add WCS into ACS server and I have done the all the required configuration but still WCS is unable to authenticate thro ACS. There is no passed or failed auth report on ACS for WCS users. Can you  guide me on how to fix it?

Thanks,

Hassan

[George Stefanick]

Hey Mohammed,

A few questions. You added the ACS servers to WCS and you added the WCS as a device in ACS ?

What ACS are you using?

I assume you are using TACACS+ ?

Under administration--> AAA --->AAA mode ---> Do you have TACACS+ selected ?

[hassan_si]

Thanks for you reply

Yes. I have added WCS as a AAA client in ACS using TACACS+ and AAA mode is selected as TACACS+

[George Stefanick]

Curious... Did you load the WCS attributes from WCS to ACS?

Example

role0=SuperUsers

task0=Users and Groups

task1=Audit Trails

task2=TACACS+ Servers

task3=RADIUS Servers

task4=Logging

task5=License Center

task6=Scheduled Tasks and Data Collection

task7=User Preferences

task8=System Settings

task9=Diagnostic Information

task10=View Alerts and Events

task11=Email Notification

task12=Delete and Clear Alerts

task13=Pick and Unpick Alerts

task14=Configure Controllers

task15=Configure Templates

task16=Configure Config Groups

task17=Configure Access Points

task18=Configure Access Point Templates

task19=Configure Choke Points

task20=Monitor Controllers

task21=Monitor Access Points

task22=Monitor Clients

task23=Monitor Tags

task24=Monitor Security

task25=Monitor Chokepoints

task26=Mesh Reports

task27=Client Reports

task28=Performance Reports

task29=Security Reports

task30=Location Server Management

task31=View Location Notifications

task32=Maps Read Only

task33=Maps Read Write

task34=Client Location

task35=Rogue Location

task36=Planning Mode

task37=Ack and Unack Alerts

task38=Migration Templates

task39=Configure Spectrum Experts

task40=Monitor Spectrum Experts

task41=Virtual Domain Management

task42=High Availability Configuration

task43=Health Monitor Details

task44=Configure WIPS Profiles

task45=Global SSID Groups

task46=Configure Lightweight Access Point Templates

task47=Configure Autonomous Access Point Templates

task48=Scheduled Configuration Tasks

task49=Configure Location Sensors

task50=Configure ACS View Servers

task51=Auto Provisioning

task52=Monitor Location Sensors

task53=RRM Dashboard

task54=Compliance Assistance Reports

task55=Voice Audit Report

task56=Config Audit Dashboard

task57=Handover Server Management

task58=Monitor Handover Server

task59=Configure Ethernet Switch Ports

task60=Configure Ethernet Switches

task61=Monitor Interferers

task62=Device Reports

task63=Network Summary Reports

task64=Compliance Reports

task65=CleanAir Reports

task66=Report Launch Pad

task67=Run Reports List

task68=Saved Reports List

task69=Report Run History

task70=Automated Feedback

task71=TAC Case Attachment Tool

[hassan_si]

Yes. Added Wireless-WCS-HTTP and under custom attributes -> pasted the above roles.

[George Stefanick]

What ACS version you on ?

[hassan_si]

ACS version 4.2 patch 10

[hassan_si]

version 4.2.0.124 (patch 10)