cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Community Live- Understanding How Multicast Works with Cisco
179
Views
0
Helpful
2
Replies
Beginner

AIR-BR1310G-A-K9-R with AIR-AP1131AG-A-K9 client?

Hallo Community,

we have a customer who runs an bridge with two Aironet BR1310G Sys. S/W 12.4. Within the beam area there is an workshop what requires access for two or three workstations. Is it possible to use a AP1131G as "client" device because of cost reasons?

I could not find a hint in the documentation so far... Thank you!

2 REPLIES 2
Enthusiast

Re: AIR-BR1310G-A-K9-R with AIR-AP1131AG-A-K9 client?

I believe you can set an 1131 as a WGB but not as a non-root bridge. For a WGB scenario, you'll need to make sure that your root bridge is set as "station-role root bridge wireless-clients" and your 1131 as "station-role workgroup-bridge".

You can try setting your 1131 as "station-role non-root" instead, but I don't think that mode is allowed on that hardware.

You should be able to pick up a used 1232 relatively cheap, if you prefer to stick with real bridging.

Highlighted
Beginner

Re: AIR-BR1310G-A-K9-R with AIR-AP1131AG-A-K9 client?

Thank you! To avoid any problems I stay with the bridging and look for some Aironet 1232.

Bret

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards