I experience the following error and am courious if the radio has to be replaced? I could not find this error in the error reference so far. Thank you!
Critical Interface Dot11Radio0, failed - cmd busy -Traceback= 0x5DCB8 0x4EEC80 0x4EEBE4 0x793EE0 0x794140 0x7985C4 0x4EDCD8 0x4EE0E0 0x4EE494 0x198C10 Notification Line protocol on Interface Dot11Radio0, changed state to up Error Interface Dot11Radio0, changed state to up Warning Interface Dot11Radio0, Associated To AP YXZ-XYZ-BR01 001d.709a.feb0 [None] Notification Line protocol on Interface Dot11Radio0, changed state to down Notification Line protocol on Interface BVI1, changed state to up Notification Line protocol on Interface FastEthernet0, changed state to up Information Logging to host 10.10.0.10 started - CLI initiated Notification Interface Dot11Radio0, changed state to reset Notification SNMP agent on host XYZ-XYZ-BR02 is undergoing a cold start Notification System restarted --
After adding a WLC to ISE if you get the following error (See message below) after running debug aaa tacacs enable in the WLC. Incorrectly formatted authorization message Here's what you need to do to fix it. Login to ISE Work centers, Settings, Device ad...
Community Live- Understanding How Multicast Works with Cisco Wireless LAN Controllers
(Live event - formerly known as Webcast- Tuesday November 19, 2019 at 9 am Pacific/ 12 pm Eastern / 6 pm Paris)
This event will have place on Tuesday 19th, Novembe...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...
New Version for the Wireless Lan Config Analyzer: v.4.4.14
Supports AireOS up to 8.8, any model.
Error parsing AP list with location with spaces
For tool information: