Re: Aironet APs not joining the 4402 controller - Page 3

ethutchinson · ‎01-31-2014

Got a strange one here.

I have six Aironet a/b/g access points that wont join my 4402 Wireless

Lan Controller. They are getting IP s from my DHCP server. I have

set up the scope with the Vendor description and Option 43 info

that has the ip of the controller embedded. The controller can ping

the APs no problem but when I reboot them they do not join the controller

Any ideas?

Sandeep Choudhary · ‎02-04-2014

Hi Kamal,

No problem, Alwayas ready for help.

Create a new fresh thread so that we can know the exact problem.

Regards

KAMAL MISHRA · ‎02-04-2014

Dear Sandeep,

thanks a lot for your valuable help.

*******

Message was edited by: KAMAL MISHRA

KAMAL MISHRA · ‎02-04-2014

Dear Sandip,

My earlier doubts was very much cleared from ur side.

and u have give me solution for all my queries i got nice and prompt support from you.

Thanks.....

Sandeep Choudhary · ‎02-04-2014

Glad that kuch to kam aaya

If you any doubts then posts a thread.

Regards

Dont forget to rate all helpful posts

KAMAL MISHRA · ‎02-04-2014

Sandeep,

rating opting im not finding...

Sandeep Choudhary · ‎02-04-2014

see this image:

Regards

ethutchinson · ‎02-10-2014

Sorry to not get back you. I was involved in another setup. I will try to

add the base ethernet Mac address to day to the GUI as you have

suggested and I will get back to you.

ethutchinson · ‎02-10-2014

Sandeep,

There are three options for certificate when I go to

add the MAC address. mic, ssc, lsc. Which one do I want?

Sandeep Choudhary · ‎02-10-2014

Select MIC.

If still fail then paste the. Boot process from AP.

Regards

Sent from Cisco Technical Support iPhone App

ethutchinson · ‎02-10-2014

I think I bricked the one I was testing with by pressing the mode button on the back. My bad. Well I grabbed another one from the pile and plugged it in to my switch. This time it grabs an IP ( no option 43 though ) but dumps on these lines.

*Feb 10 17:18:41.000: DTLS_CLIENT_ERROR: ../dtls/dtls_connection_db.c:2017 Max retransmission count reached!

*Feb 10 17:18:41.000: %DTLS-3-HANDSHAKE_RETRANSMIT: Max retransmit count for 192.168.10.2 is reached.

*Feb 10 17:19:01.046: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.10.2:5246 *Feb 10 17:18:41.000: DTLS_CLIENT_ERROR: ../dtls/dtls_connection_db.c:2017 Max retransmission count reached!
*Feb 10 17:18:41.000: %DTLS-3-HANDSHAKE_RETRANSMIT: Max retransmit count for 192.168.10.2 is reached.
*Feb 10 17:19:01.046: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.10.2:5246

I wonder if it thinks 192.168.10.2 is my WLC. Because it is not. Is there a way to see what controller address if any has been assigned to the AP?

Thanks

Sandeep Choudhary · ‎02-10-2014

Can you paste the full bootup process....reboot it and paste all logs.

Reagrds

ethutchinson · ‎02-10-2014

Sorry bout that, Here you go

Xmodem file system is available.
flashfs[0]: 10 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6869504
flashfs[0]: Bytes available: 9129472
flashfs[0]: flashfs fsck took 28 seconds.
Base ethernet MAC Address: 00:1b:d4:c1:6a:b8
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1240-k9w8-mx.124-23c.JA6/c1240-k9w8-mx.124-23c.JA6"...#############################################################

File "flash:/c1240-k9w8-mx.124-23c.JA6/c1240-k9w8-mx.124-23c.JA6" uncompressed and installed, entry point: 0x3000
executing...

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706

Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(23c)JA6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Wed 05-Sep-12 14:23 by prod_rel_team

Proceeding with system init

Proceeding to unmask interrupts
Initializing flashfs...

flashfs[1]: 10 files, 3 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15740928
flashfs[1]: Bytes used: 6869504
flashfs[1]: Bytes available: 8871424
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.

Radio0 present A506 7100 E8000000 A0000000 80000000 3
Radio1 present A506 6700 E8000100 A0040000 80010000 2
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-LAP1242AG-A-K9 (PowerPCElvis) processor (revision A0) with 27638K/5120K bytes of memory.
Processor board ID FTX1120B4MH
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 7.0.235.3
1 FastEthernet interface
2 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:1B:D4:C1:6A:B8
Part Number                          : 73-9925-06
PCA Assembly Number                  : 800-26579-05
PCA Revision Number                  : A0
PCB Serial Number                    : FOC11171ZBY
Top Assembly Part Number             : 800-29232-01
Top Assembly Serial Number           : FTX1120B4MH
Top Revision Number                  : A0
Product/Model Number                 : AIR-AP1242AG-A-K9
% Please define a domain-name first.

Press RETURN to get started!

*Mar 1 00:00:05.566: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:07.171: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:08.769: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:08.866: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1024 messages)

*Mar 1 00:00:08.896: status of voice_diag_test from WLC is false
*Mar 1 00:00:11.001: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:11.061: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(23c)JA6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Wed 05-Sep-12 14:23 by prod_rel_team
*Mar 1 00:00:11.061: %SNMP-5-COLDSTART: SNMP agent on host AP001b.d4c1.6ab8 is undergoing a cold start
*Mar 1 00:00:11.141: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:00:11.320: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:11.321: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:11.321: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:11.560: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:00:11.560: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:12.004: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:12.330: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:12.330: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:19.445: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.10.5, mask 255.255.255.0, hostn8

*Mar 1 00:00:29.994: status of voice_diag_test from WLC is false
*Mar 1 00:00:30.070: Logging LWAPP message to 255.255.255.255.

Translating "CISCO-CAPWAP-CONTROLLER.AD.NEWTONMA.GOV"...domain server (192.9.202.207) [OK]

Translating "CISCO-LWAPP-CONTROLLER.AD.NEWTONMA.GOV"...domain server (192.9.202.207) [OK]

*Feb 10 17:18:01.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.10.2 peer_port: 5246
*Feb 10 17:18:04.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Feb 10 17:18:25.333: %CDP_PD-4-POWER_OK: Full power - NON_CISCO-NO_CDP_RECEIVED inline power source
*Feb 10 17:18:25.366: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Feb 10 17:18:25.405: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Feb 10 17:18:26.335: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Feb 10 17:18:26.335: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
*Feb 10 17:18:26.371: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Feb 10 17:18:41.000: DTLS_CLIENT_ERROR: ../dtls/dtls_connection_db.c:2017 Max retransmission count reached!
*Feb 10 17:18:41.000: %DTLS-3-HANDSHAKE_RETRANSMIT: Max retransmit count for 192.168.10.2 is reached.
*Feb 10 17:19:01.046: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.10.2:5246
*Feb 10 17:19:04.093: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Feb 10 17:19:04.093: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Feb 10 17:19:04.153: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Feb 10 17:19:04.153: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Feb 10 17:19:04.154: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Feb 10 17:19:04.184: status of voice_diag_test from WLC is false
*Feb 10 17:19:04.185: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Feb 10 17:19:04.187: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Feb 10 17:19:04.192: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Feb 10 17:19:04.219: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Feb 10 17:19:14.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.10.2 peer_port: 5246