Hi, I have some AP 1130 who's had strange behavior. For sometimes now, some of these AP stop showing the 802.11b/g/n Radio interface. So I can't enable it anymore. I try to reset the AP to factory default, nothing change.
I had 2 controller WISM in my 6509E chassis
The boot version on the AP is 12.3.8
The software version is 7.0.0220.0
the ios version is 12.4(23c)JA3
Do you ever see these symptoms?
I didn't plug a console port directly on the AP because for now I didn't have a PC with a serial port, so I can't see if there any log in the AP.
Community Live- Understanding How Multicast Works with Cisco Wireless LAN Controllers
(Live event - formerly known as Webcast- Tuesday November 19, 2019 at 9 am Pacific/ 12 pm Eastern / 6 pm Paris)
This event will have place on Tuesday 19th, Novembe...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...
New Version for the Wireless Lan Config Analyzer: v.4.4.14
Supports AireOS up to 8.8, any model.
Error parsing AP list with location with spaces
For tool information:
Trying every method to convert a AIR-CAP1702I-A-K9 AP from Lightweight to Autonomous and am having no success whatsoever. I connect the Ethernet cable to the PoE port on the back of the AP and straight to my laptop. I then configure the Laptop...