12-04-2018 10:26 AM - edited 07-05-2021 09:32 AM
Hello, have a god day!
I have a problem with a wireless network, al the access Point model 1700i was joined to a WLC, but this Wlc was Crashed.
My question is if I can re-join those access Point to the new WLC without press the reset button, because all the AP´s are mounted on the Wall.
If the answer is yes, how can I do that?
12-04-2018 11:38 AM
There are multiple ways,
As long as you configure DHCP option 43 to point to new WLC management IP address
or
add a DNS entry you should see those AP will register to new WLC
CISCO-CAPWAP-CONTROLLER.<local_domain_name> to resolve your new WLC management IP address
HTH
Rasika
*** Pls rate all useful responses ***
12-04-2018 11:58 AM
12-04-2018 12:02 PM
Yes, DNS method will work. Let us know how it goes
Here is another option, broadcast forwarding
https://mrncciew.com/2013/05/04/wlc-discovery-via-broadcast/
HTH
Rasika
*** Pls rate all useful responses ***
12-04-2018 01:29 PM
Humm, static IP on the AP, but does not link to a wlc. Is this a SAP1702? rather than a CAP1702?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide