06-07-2015 06:49 PM - edited 07-05-2021 03:21 AM
Hi All
I have a question about my AP Cisco 1520 can't join WLC 2504.
i have 3 AP Cisco 1520 LWAP, with the same AirOS c1520-k9w8-tar.152-2.JB3.tar. but only one AP that can join with the WLC.
there are an error log from the AP's that can't join WLC, please check my attachment.
please give me the solution
Thank you
Cheers
Solved! Go to Solution.
06-08-2015 10:36 AM
The 1520's are mesh access-points, the AP MAC address of those AP's need to be authorized. The most simple way of doing this is with the "AP Policies" setting, you can find this setting under "Security" -> "AAA" -> "AP Policies". You should also see an error message right now on the WLC that the AP can not be authorized because of this.
06-08-2015 10:36 AM
The 1520's are mesh access-points, the AP MAC address of those AP's need to be authorized. The most simple way of doing this is with the "AP Policies" setting, you can find this setting under "Security" -> "AAA" -> "AP Policies". You should also see an error message right now on the WLC that the AP can not be authorized because of this.
06-08-2015 06:07 PM
Hi Freerk
so i need to register the AP MAC Address on the WLC by the setting you gave to me?
Thanks
06-09-2015 01:26 AM
Yes, that is one of the available methods to authorize mesh access-points.
06-18-2015 08:10 AM
thanks a lot Freerk it's work
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide