I have 2 virtual controllers connected to my corporate network and some how lose there configuration. What seems to happen is that the AP is disassociated from the controller and then rejoins and has lost its config. The access points are setup as flex connect and have both controllers in the high availability section. the AP is not rebooting because the AP up time is greater than the controller time.
I understand why the times are different but, I am wondering what is the cause. The network is stable or I would have complaints from users. I am just not understanding why they dissociate and lose their config.
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...
New Version for the Wireless Lan Config Analyzer: v.4.4.14
Supports AireOS up to 8.8, any model.
Error parsing AP list with location with spaces
For tool information:
Trying every method to convert a AIR-CAP1702I-A-K9 AP from Lightweight to Autonomous and am having no success whatsoever. I connect the Ethernet cable to the PoE port on the back of the AP and straight to my laptop. I then configure the Laptop...
The Ap lose ip static, we thought the Ap was not able to communicate with the WLC with assigned static IP address. When this happens the ap will fall back ti trying ti get a DHCP address.This occur randomly in platform controller 2504 with AP's model AIR-...