cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

155
Views
0
Helpful
1
Replies
Highlighted
Beginner

AP1542i Management Interface

We have perhaps the completely wrong hardware, but  here is what we have, and what we want to do:

 

AP1542i wired to network, acting as bridge for two APs:

two WAP731 APs - both acting as AP for mobile clients.

 

Have experience with AP1530 which had a web interface, but the 1542 seems to be completely different.

The AP1542i was delivered with lightweight image.

Only available images are: ap1g5-k9w8-tar.153-3.JJ1.tar (lightweight) or AIR-AP1540-K9-ME-8-10-105-0.tar (mobility-express)

Have tried both images, and with ME, both CAPWAP and ME modes, but no management.

The AP gets an IP address via DHCP. It can be pinged, but nothing else - no ssh, no http and no https.

Have also tried to see if a SSID (e.g., CiscoAirProvision) appears, but the AP is sending no SSID on the air.

The box runs, but does nothing and has no web management interface.

 

What am I missing? Does this AP not provide a web interface?

Many references (manuals, guides, community) indicate that there is (was?) a web interface, and many indicate  CLI commands, which are not even allowed in the AP that we have. E.g., "# ip ..." - no image that I have tested, even has an "ip" command in the enabled mode.

Can anyone please hep?

 

Everyone's tags (1)
1 REPLY 1
Beginner

Re: AP1542i Management Interface

I am also facing a similar issue. Do let me know as well if you find out any helpful guide.

CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards