APs controller assigning wireless clients ip addresses that are off of the APs subnet
I am having an issue with wireless controler assigning wireless clients ip addresses that are off of the associated access point’s subnet.
We have a Cisco 5500 Series wireless controller on our 192.168.0.0 LAN
We have 3 subnets all of which have access points 188.8.131.52, 184.108.40.206, and 220.127.116.11.
All access points have static ips and are configured the match their respective subnets and connected to the switch within their subnet.
When any wireless client connects to an access point within the subnet the client is automatically assigned a 192.168.x.x ip address of the lan and is not given an ip address with in the subnet. However, the client see the 192.165.x.x (subnet router interface) as it’s gateway.
I have searched and cannot figure out why the wireless clients are not being assigned ip address on the subnet of which the associated access point is attached.
Dear Friends, I have to upgrade IOS in 5520, here my question was how to identify which FUS was installed in the WLC.GUI ----Software Version 18.104.22.168Emergency Image Version 22.214.171.124 -------sh sysinfo Product Version....................
Security has become one of the greatest concerns for every company alike. The industry is moving towards a fast paced and customer-oriented network infrastructure which automatically increases the vulnerabilities a network is exposed to. As the industry t...
We got some new Apple Macbook Air, when connected to wifi, we found the link speed was only 54Mbits, but other laptops like DELL or Panasonic were working fine, the link speed was at least 800 Mbits. we are using Cisco WLC 5504 and 2702I ap.and the funny ...
In today’s world where business needs to be up and available 24X7, one of the major challenges faced by a lot of companies is the seamless uptime of their network infrastructure. Any company’s primary focus is always on keeping its infrastructure ready fo...