i have a 1300 fat access point which was idle for months...
when i tried to verify the configuration via gui, the previous ssid setting was no longer there. though, ip address was still set as is.
going to the ssid setting page, the ssid list box is empty, even the 'New' item is missing.
refreshed the page many times, but it didn't appear.
restored a fresh copy of the same iOS didn't help.
wanted to recode with an older iOS, but don't have one.
tried this with Explore, Firefox and Chrome... nothing helped.
also, why are autonomous web interfaces take time to refresh a page even when you're directly connected to the fat ap. it's alright for a couple of access points, but i have one customer having 80 fat ap's. if the customer wishes to change the wifi password, then it would take hours to do so because of the delay with the refresh timing.
WLAN Poller provides functionality to:
Bulk data/debug collection from Controllers and APs. Execute the commands on regular intervals.
DFS statistics and debug collection
IOS AP Flash health check and memory
AP cert check with generating reports
My report tells you a simple viewpoint to understand the evolution of the wireless LAN from 1997 to the 2020s. You can also get basic knowledge on an uplink of Wi-Fi6, the latest IEEE 802.11ax standard. Data analysis results based on our experimental s...
WLAN controller newb here. A power outage took out my home network but upon return my two SSIDs came back and my three APs went blue... everything WiFi related was working as expected. Sometime later I logged into the WLAN Controller web-page to see I hav...
Will an AP join the desired Flexconnect group by default in an HA N+1 redundancy as it does in HA-SSO as a cloud entry ? Does it join the same Flexconnect group of which it was a member of prior to switchover or do I need to add it into the desired Flexco...