cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Popup Hotspot Using ISR 1000 with WiFi/LTE for Teleworkers and Micro Branchesr

Ask Me Anything – How to Enable Network Connectivity to Remote Workers
202
Views
5
Helpful
3
Replies
Highlighted
Enthusiast

C9800 - Radius Server Overwrite Interface

Screenshot 2020-04-08 at 17.18.13.png

Does anyone know how to implement this feature on the C9800 ?
Need this for a PWLAN service where I have to source the radius request from the same interface as the clients are in...
At the moment the only way I see is to create this SSID for every interface It will be used

Best regards
Markus

Everyone's tags (2)
3 REPLIES 3
Highlighted
VIP Mentor

Re: C9800 - Radius Server Overwrite Interface

On AireOS here is the CLI command

config wlan radius_server overwrite-interface enable <wlan_id>

 

It is not yet supported in IOS-XE (9800). You can use the below tool for config migration support 

https://cway.cisco.com/tools/WirelessConfigConverter/

 

HTH

Rasika

*** Pls rate all useful responses ***

Highlighted
Beginner

Re: C9800 - Radius Server Overwrite Interface

Hi Rasika,
Thank you for the info. I guess the feature is still unavailable, right? Do you have any suggestion on its release date and/or version?
Highlighted
VIP Mentor

Re: C9800 - Radius Server Overwrite Interface

I do not know when this feature adding to IOS-XE, I would normally check release notes of upcoming IOS-XE releases (as of today it is 17.2.x)

 

HTH

Rasika

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey