10-01-2014 07:15 AM - edited 07-05-2021 01:38 AM
Hi guys,
I have two CT5760 so but just one of them came with a stack cable. Can I do a HA connection with just one STK cable, I friend of mine intentend to do this ask yesteday and he sent me this output:
WLC#show switch stack-ports summary
Sw#/Port# Port Status Neighbor Cable Length Link OK Link Active Sync OK #Changes to LinkOK In Loopback
-------------------------------------------------------------------------------------------------------------------
1/1 DOWN NONE Unknown Yes No Yes 0 No
1/2 DOWN NONE Unknown Yes No Yes 0 No
Solved! Go to Solution.
10-01-2014 08:12 AM
you should be able to do it with just one cable, per the 5760 HA guide, two is recommended for a 'full ring':
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/5760_HA_DG_iosXE33.html#pgfId-43194
HTH,
Steve
10-01-2014 08:12 AM
you should be able to do it with just one cable, per the 5760 HA guide, two is recommended for a 'full ring':
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/5760_HA_DG_iosXE33.html#pgfId-43194
HTH,
Steve
10-01-2014 08:55 AM
Thanks Steve. I will try it today. I've seen both controllers are using Version 03.02.03.SE RELEASE SOFTWARE (fc2) and the Part number is:
NAME: "Switch 1", DESCR: "AIR-CT5760-6"
PID: AIR-CT5760 , VID: V03
Do you know what mean the last 6 of the description?
Thnks
Jorge
10-01-2014 09:08 AM
according to that document, it is the SKU
HTH
Steve
10-02-2014 07:41 AM
Thanks Steve, I upgraded to IOS XE 03.03.04SE in order to support HA.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: