cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
259
Views
0
Helpful
6
Replies
Highlighted
Beginner

Cannot turn up radios on AIR-CAP1552E-E-K9

Hi all,

 

I have a Cisco 2504 WLC with 10 x 3602I's that are working fine but I cannot get the AIR-CAP1552E-E-K9  to power up the radios.  I have the inline power injector installed (AIR-PWRINJ1500-2=) and under the advanced menu I've got the power injector option ticked. Problem is under the interfaces tab I have 802.11b/g/n as admin enable but operational down. The antennas are 3 x AIR-ANT2547V-N.

 

Any ideas?

 

Thanks,

 

Adam

6 REPLIES 6
Highlighted

what is the regulatory domain

what is the regulatory domain of your 3602? the 1552 you have are for Europe.

 

So if your WLC is set for US, the radios in the 1552 won't work unless you enabled a European domain. But if you are in the US, it would be best to get your partner to replace them with the -A-K9 model.

 

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Highlighted
Beginner

Hi,They're all E domains as I

Hi,

They're all E domains as I'm in Europe and the bands are showing as supported. 

 

Thanks

 

Adam

Highlighted

interesting.....are you

interesting.....are you selected for injector override?

 

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Beginner

Yep :)

Yep :)

Highlighted

hmm..Ok, if you do an admin

hmm..Ok, if you do an admin disable, and then an admin enable. Does the radio turn on?

 

Would it be possible for you to gather the console messages during boot up and join?

 

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Highlighted
Beginner

Hi Steve, If I admin disable

Hi Steve,

 

If I admin disable and then try to re-enable I get an error saying that the admin status could not be changed. I'll try and get the console output tomorrow from the on site tech.

 

thanks,

 

Adam

CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards