CCM 4.2 Changing code pin minimum size

[ccr_cisco]

Hi,

Is there's a way to change the minimum size of the user's code pin from 5 to 4 caracters.

Thanks for your answer

[Rob Huffman]

Hi Morgan,

Here is a good Cisco tech note that describes the process required to change the minimum Pin length;

DC Directory: Modify the Default User PIN and Password Length

From this good doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a00805ca029.shtml

Hope this helps!

Rob

Please remember to rate helpful posts.....

[ccr_cisco]

Hi,

Thanks for your answer but I have an active directory integration so I think this technote is not the good one.

Is there the same procedure for AD.

Thanks

[Rob Huffman]

Hi Morgan,

Sorry about that :) Have a look at this recent post that relates to AD rather than DC Directory and the good answer from Gonz @ Cisco Systems;

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1dde91ce/0#selected_message

Hope this helps!

Rob