07-28-2012 08:57 AM - edited 07-03-2021 10:28 PM
Dear Friends,
One of my Wi-Fi site, having cisco_1130AG access points nearly 110nos
as of now i installed 80nos, after installing, in out off 80nos nearly 12nos of APs's radio is showing down.
Again i reset and re-configure then it is working fine,
is there any readio (802.11g/a) problem in this model?
if there is a problem with radio, how to fix ?
Thanks,
Srinivas. N
07-28-2012 02:26 PM
I don't know of any issue, but is the autonomous or lightweight access points. It seems like you have a workaround though.
Sent from Cisco Technical Support iPhone App
07-28-2012 05:34 PM
More information please.
Is your WAP in autonomous or controller-based IOS?
Can you post the entire bootup process of the WAP that is exhibiting this sort of behaviour?
07-28-2012 07:33 PM
User Access Verification
Username: cisco
Password:
LEVEL-0_CONHALL2_002>en
Password:
LEVEL-0_CONHALL2_002#sh ver
Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.4(21a)JA1, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 16-Sep-09 18:36 by prod_rel_team
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (
fc2)
LEVEL-0_CONHALL2_002 uptime is 2 weeks, 3 days, 21 hours, 8 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-k9w7-mx.124-21a.JA1/c1130-k9w7-mx.124-21a.JA1
"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco AIR-AP1131AG-N-K9 (PowerPCElvis) processor (revision C0) with 24566K/81
92K bytes of memory.
Processor board ID FGL1511V14P
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 64:00:F1:4D:77:56
Part Number : 73-8962-14
PCA Assembly Number : 800-24818-13
PCA Revision Number : B0
PCB Serial Number : FOC15091P6K
Top Assembly Part Number : 800-29230-02
Top Assembly Serial Number : FGL1511V14P
Top Revision Number : A0
Product/Model Number : AIR-AP1131AG-N-K9
Configuration register is 0xF
LEVEL-0_CONHALL2_002#
07-28-2012 07:41 PM
1. Please post the "sh logs".
2. Reboot the WAP and post the entire bootup process.
07-28-2012 07:47 PM
Is it just the RADIO resetting or the AP??
Please provide show tech from the AP to proceed further!!
Regards
Surendra
02-15-2015 10:02 AM
Hello Srinivas,
I believe that you might have already found the solution. - Ios upgrade.
There is bug in version 124-21a.JA1, which causes radio interface to be reset status.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide