cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Popup Hotspot Using ISR 1000 with WiFi/LTE for Teleworkers and Micro Branchesr

Ask Me Anything – How to Enable Network Connectivity to Remote Workers
1089
Views
0
Helpful
5
Replies
Highlighted
Beginner

Cisco 1242 MESH Config Assistance

I would like to create a Mesh network using Cisco 1242 AP's running in Autonomous mode via A Channel.

Any help on this project would be greatly appreciated

Everyone's tags (3)
5 REPLIES 5
Highlighted
Hall of Fame Master

Re: Cisco 1242 MESH Config Assistance

You can't. You could if you had a WLC and the AP's were converted to lightweight. Sorry... Just not possible with autonomous AP's.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Highlighted
Beginner

Cisco 1242 MESH Config Assistance

Thank You Scott

Highlighted
Hall of Fame Master

Re: Cisco 1242 MESH Config Assistance

No problem

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Highlighted
Hall of Fame Master

Cisco 1242 MESH Config Assistance

Here is a link just in case:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080b1c101.shtml

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

-Scott
*** Please rate helpful posts ***
Highlighted
Cisco Employee

Cisco 1242 MESH Config Assistance

you could do wireless bridging using ios APs.

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey