Cisco 1242 MESH Config Assistance

[mbishop]

I would like to create a Mesh network using Cisco 1242 AP's running in Autonomous mode via A Channel.

Any help on this project would be greatly appreciated

[Scott Fella]

You can't. You could if you had a WLC and the AP's were converted to lightweight. Sorry... Just not possible with autonomous AP's.

Sent from Cisco Technical Support iPhone App

[mbishop]

Thank You Scott

[Scott Fella]

No problem

Sent from Cisco Technical Support iPhone App

[Scott Fella]

Here is a link just in case:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080b1c101.shtml

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[Saravanan Lakshmanan]

you could do wireless bridging using ios APs.